Wax & tune for Powder Mountain Ski Resort
2,370 ft of vertical, 14 lifts, dry inland snow. Wax color and iron temperature from the forecast at mid-mountain, edge settings for how you ski or ride, and a step-by-step home tune.
- Air temp
- —
- Humidity
- —
- New snow, 48 h
- —
- Sky
- —
- Forecast elevation
- —
- Recent high
- —
Adjust conditions
Have a snow thermometer? Set the air temperature to your reading for the most accurate wax pick.
What the angles do
A cross-section of the ski's edge. Base bevel lifts the edge off the snow so the ski rolls onto it more smoothly. Side bevel makes the edge sharper so it bites harder snow. Try the numbers to see what each setup does; most skiers choose one and keep it for the life of their skis.
The bench walkthrough
Ten steps, about 90 minutes with cooling time. The settings in each step follow your resort and style above.
Your kit for this tune
Everything the walkthrough uses, sized to today's settings. Shop links go to Amazon. As an Amazon Associate, The Ski Advisor earns from qualifying purchases.
Skiing Powder Mountain Ski Resort's snow
Powder Mountain Ski Resort is a ski area in Utah with 14 lifts and 155 mapped runs. Its lifts reach from about 6,640 ft (2,023 m) to 9,010 ft (2,745 m), 2,370 ft of vertical.
It sits far enough inland that storms drop lighter, drier snow, with cold nights and milder, sunny afternoons between storms. A large share of the mapped runs are advanced or expert terrain, where sharp edges pay off.
The forecast on this page is for 7,820 ft (2,384 m), halfway up the mountain.
Tuning tips for Powder Mountain Ski Resort
- After a storm, dry new snow calls for a colder wax than the temperature alone suggests.
- Clear nights make first-chair snow colder than the air. Plan for the colder end of the wax range in the morning.
- The mid-mountain forecast here, at 7,820 ft, covers most of the terrain.
Related guides
Weather from MET Norway's forecast at Powder Mountain Ski Resort's mid-mountain elevation.
Snow temperature is estimated from air temperature and sky cover. A snow thermometer reading is better. Wax ranges vary by brand, so the temperature on the wax label wins. All waxes suggested here are fluoro-free.
Base bevels are usually set by a shop's stone grind. If your skis are new or freshly ground, ask the shop what they set before you change anything.
