Wax & tune for Whistler Blackcomb
Coastal snow, huge vertical and big temperature swings. Wax color and iron temperature from the forecast at mid-mountain, edge settings for how you ski or ride, and a step-by-step home tune.
- Air temp
- —
- Humidity
- —
- New snow, 48 h
- —
- Sky
- —
- Forecast elevation
- —
- Recent high
- —
Adjust conditions
Have a snow thermometer? Set the air temperature to your reading for the most accurate wax pick.
What the angles do
A cross-section of the ski's edge. Base bevel lifts the edge off the snow so the ski rolls onto it more smoothly. Side bevel makes the edge sharper so it bites harder snow. Try the numbers to see what each setup does; most skiers choose one and keep it for the life of their skis.
The bench walkthrough
Ten steps, about 90 minutes with cooling time. The settings in each step follow your resort and style above.
Your kit for this tune
Everything the walkthrough uses, sized to today's settings. Shop links go to Amazon. As an Amazon Associate, The Ski Advisor earns from qualifying purchases.
Skiing Whistler Blackcomb's snow
Whistler Blackcomb sits close enough to the Pacific that its snow is often heavier and wetter than snow in the Rockies. The lifts climb from the village, around 2,200 feet, into alpine terrain above 7,000 feet, so it can be raining in the village while it snows hard up top.
The wax pick on this page uses mid-mountain conditions, around 4,900 feet. If you'll spend the day in the alpine, set a colder temperature under Adjust conditions.
Tuning tips for Whistler Blackcomb
- Humidity is usually high here. When you're between two waxes, take the warmer one for the lower mountain.
- Wet coastal snow causes suction. Brushing the structure back into the base matters as much as the wax color.
- Lower runs can turn to slush late in the day. A rub-on warm wax in your pocket helps on top-to-bottom days.
Related guides
Weather from MET Norway's forecast at Whistler Blackcomb's mid-mountain elevation.
Snow temperature is estimated from air temperature and sky cover. A snow thermometer reading is better. Wax ranges vary by brand, so the temperature on the wax label wins. All waxes suggested here are fluoro-free.
Base bevels are usually set by a shop's stone grind. If your skis are new or freshly ground, ask the shop what they set before you change anything.
