Wax & tune for Park City Mountain Resort
Utah's dry snow across one of the biggest lift networks in the US. Wax color and iron temperature from the forecast at mid-mountain, edge settings for how you ski or ride, and a step-by-step home tune.
- Air temp
- —
- Humidity
- —
- New snow, 48 h
- —
- Sky
- —
- Forecast elevation
- —
- Recent high
- —
Adjust conditions
Have a snow thermometer? Set the air temperature to your reading for the most accurate wax pick.
What the angles do
A cross-section of the ski's edge. Base bevel lifts the edge off the snow so the ski rolls onto it more smoothly. Side bevel makes the edge sharper so it bites harder snow. Try the numbers to see what each setup does; most skiers choose one and keep it for the life of their skis.
The bench walkthrough
Ten steps, about 90 minutes with cooling time. The settings in each step follow your resort and style above.
Your kit for this tune
Everything the walkthrough uses, sized to today's settings. Shop links go to Amazon. As an Amazon Associate, The Ski Advisor earns from qualifying purchases.
Skiing Park City Mountain Resort's snow
Park City is one of the largest ski areas in the United States, with lifts from about 6,800 to 10,000 feet. Utah snow is known for being light and dry, and there's a lot of grooming.
The base is lower than most Colorado resorts, so the bottom of the mountain warms up and refreezes more often. Expect firm snow on lower runs the morning after a warm day.
Tuning tips for Park City Mountain Resort
- Lower runs go through freeze-thaw cycles. Sharpen before a morning after a warm day.
- After a storm, dry Utah powder calls for a colder wax than the temperature alone suggests.
- Long groomed cruisers reward a fresh wax job. Re-wax every few ski days.
Related guides
Weather from MET Norway's forecast at Park City Mountain Resort's mid-mountain elevation.
Snow temperature is estimated from air temperature and sky cover. A snow thermometer reading is better. Wax ranges vary by brand, so the temperature on the wax label wins. All waxes suggested here are fluoro-free.
Base bevels are usually set by a shop's stone grind. If your skis are new or freshly ground, ask the shop what they set before you change anything.
