Wax & tune for Okemo Mountain
2,170 ft of vertical, 21 lifts, eastern snow and ice. Wax color and iron temperature from the forecast at mid-mountain, edge settings for how you ski or ride, and a step-by-step home tune.
- Air temp
- —
- Humidity
- —
- New snow, 48 h
- —
- Sky
- —
- Forecast elevation
- —
- Recent high
- —
Adjust conditions
Have a snow thermometer? Set the air temperature to your reading for the most accurate wax pick.
What the angles do
A cross-section of the ski's edge. Base bevel lifts the edge off the snow so the ski rolls onto it more smoothly. Side bevel makes the edge sharper so it bites harder snow. Try the numbers to see what each setup does; most skiers choose one and keep it for the life of their skis.
The bench walkthrough
Ten steps, about 90 minutes with cooling time. The settings in each step follow your resort and style above.
Your kit for this tune
Everything the walkthrough uses, sized to today's settings. Shop links go to Amazon. As an Amazon Associate, The Ski Advisor earns from qualifying purchases.
Skiing Okemo Mountain's snow
Okemo Mountain is a ski area in Ludlow, Vermont with 21 lifts and 116 mapped runs. Its lifts reach from about 1,160 ft (353 m) to 3,320 ft (1,012 m), 2,170 ft of vertical.
Frequent freeze-thaw cycles and a lot of machine-made snow make firm, icy conditions common, especially in the morning. The mapped runs mix beginner, intermediate and advanced terrain.
The forecast on this page is for 2,240 ft (682 m), halfway up the mountain.
Tuning tips for Okemo Mountain
- Edges matter more than wax on firm snow. Sharpen often; many skiers here run a 2° or 3° side edge.
- Machine-made snow is abrasive. Use a harder, colder wax than the temperature alone suggests.
- The mid-mountain forecast here, at 2,240 ft, covers most of the terrain.
Related guides
Weather from MET Norway's forecast at Okemo Mountain's mid-mountain elevation.
Snow temperature is estimated from air temperature and sky cover. A snow thermometer reading is better. Wax ranges vary by brand, so the temperature on the wax label wins. All waxes suggested here are fluoro-free.
Base bevels are usually set by a shop's stone grind. If your skis are new or freshly ground, ask the shop what they set before you change anything.
