Wax & tune for Misery Mountain Ski Hill
560 ft of vertical, 3 lifts, high, dry Rockies snow. Wax color and iron temperature from the forecast at mid-mountain, edge settings for how you ski or ride, and a step-by-step home tune.
- Air temp
- —
- Humidity
- —
- New snow, 48 h
- —
- Sky
- —
- Forecast elevation
- —
- Recent high
- —
Adjust conditions
Have a snow thermometer? Set the air temperature to your reading for the most accurate wax pick.
What the angles do
A cross-section of the ski's edge. Base bevel lifts the edge off the snow so the ski rolls onto it more smoothly. Side bevel makes the edge sharper so it bites harder snow. Try the numbers to see what each setup does; most skiers choose one and keep it for the life of their skis.
The bench walkthrough
Ten steps, about 90 minutes with cooling time. The settings in each step follow your resort and style above.
Your kit for this tune
Everything the walkthrough uses, sized to today's settings. Shop links go to Amazon. As an Amazon Associate, The Ski Advisor earns from qualifying purchases.
Skiing Misery Mountain Ski Hill's snow
Misery Mountain Ski Hill is a ski area in Peace River, Alberta, Canada with 3 lifts and 31 mapped runs. Its lifts reach from about 1,110 ft (339 m) to 1,670 ft (509 m), 560 ft of vertical.
High elevation and dry air mean cold, abrasive snow, strong sun, and big swings between morning and afternoon. The mapped runs mix beginner, intermediate and advanced terrain.
The forecast on this page is for 1,390 ft (424 m), halfway up the mountain.
Tuning tips for Misery Mountain Ski Hill
- Cold, dry snow is abrasive. A harder, colder wax lasts longer here than a soft one.
- Morning groomers are firm. Keep the side edge sharp; a 2° (88°) side edge suits most skiers.
- With 560 ft of vertical, conditions are similar top to bottom, so this forecast covers the whole hill.
Related guides
Weather from MET Norway's forecast at Misery Mountain Ski Hill's mid-mountain elevation.
Snow temperature is estimated from air temperature and sky cover. A snow thermometer reading is better. Wax ranges vary by brand, so the temperature on the wax label wins. All waxes suggested here are fluoro-free.
Base bevels are usually set by a shop's stone grind. If your skis are new or freshly ground, ask the shop what they set before you change anything.
