Wax & tune for Vail
High, dry Colorado snow and long groomers. Wax color and iron temperature from the forecast at mid-mountain, edge settings for how you ski or ride, and a step-by-step home tune.
- Air temp
- —
- Humidity
- —
- New snow, 48 h
- —
- Sky
- —
- Forecast elevation
- —
- Recent high
- —
Adjust conditions
Have a snow thermometer? Set the air temperature to your reading for the most accurate wax pick.
What the angles do
A cross-section of the ski's edge. Base bevel lifts the edge off the snow so the ski rolls onto it more smoothly. Side bevel makes the edge sharper so it bites harder snow. Try the numbers to see what each setup does; most skiers choose one and keep it for the life of their skis.
The bench walkthrough
Ten steps, about 90 minutes with cooling time. The settings in each step follow your resort and style above.
Your kit for this tune
Everything the walkthrough uses, sized to today's settings. Shop links go to Amazon. As an Amazon Associate, The Ski Advisor earns from qualifying purchases.
Skiing Vail's snow
Vail is one of the largest ski areas in North America, with lifts from about 8,100 feet to about 11,500 feet. At that elevation the snow is usually cold and dry, and mornings stay cold even when the afternoon sun feels warm.
The Back Bowls hold soft snow after storms. The front side's groomers are often firm until the sun reaches them.
Tuning tips for Vail
- Cold, dry snow is abrasive. A harder, colder wax lasts longer here than a soft one.
- Morning groomers are firm. Keep the side edge sharp. A 2° (88°) side edge suits most skiers.
- Strong sun warms south-facing runs quickly. If you ski mostly in the afternoon, wax for the forecast high.
Related guides
Weather from MET Norway's forecast at Vail's mid-mountain elevation.
Snow temperature is estimated from air temperature and sky cover. A snow thermometer reading is better. Wax ranges vary by brand, so the temperature on the wax label wins. All waxes suggested here are fluoro-free.
Base bevels are usually set by a shop's stone grind. If your skis are new or freshly ground, ask the shop what they set before you change anything.
