Wax & tune for Mt. Shasta Ski Park
2,070 ft of vertical, 6 lifts, coastal snow. Wax color and iron temperature from the forecast at mid-mountain, edge settings for how you ski or ride, and a step-by-step home tune.
- Air temp
- —
- Humidity
- —
- New snow, 48 h
- —
- Sky
- —
- Forecast elevation
- —
- Recent high
- —
Adjust conditions
Have a snow thermometer? Set the air temperature to your reading for the most accurate wax pick.
What the angles do
A cross-section of the ski's edge. Base bevel lifts the edge off the snow so the ski rolls onto it more smoothly. Side bevel makes the edge sharper so it bites harder snow. Try the numbers to see what each setup does; most skiers choose one and keep it for the life of their skis.
The bench walkthrough
Ten steps, about 90 minutes with cooling time. The settings in each step follow your resort and style above.
Your kit for this tune
Everything the walkthrough uses, sized to today's settings. Shop links go to Amazon. As an Amazon Associate, The Ski Advisor earns from qualifying purchases.
Skiing Mt. Shasta Ski Park's snow
Mt. Shasta Ski Park is a ski area in California with 6 lifts and 36 mapped runs. Its lifts reach from about 5,470 ft (1,666 m) to 7,540 ft (2,298 m), 2,070 ft of vertical.
Storms off the Pacific bring heavy, wet snow, and temperatures often hover near freezing, especially low on the mountain. A large share of the mapped runs are advanced or expert terrain, where sharp edges pay off.
The forecast on this page is for 6,500 ft (1,982 m), halfway up the mountain.
Tuning tips for Mt. Shasta Ski Park
- Humidity is usually high here. When you're between two waxes, take the warmer one for the lower mountain.
- Wet snow causes suction. Brushing the structure back into the base matters as much as the wax color.
- The mid-mountain forecast here, at 6,500 ft, covers most of the terrain.
Related guides
Weather from MET Norway's forecast at Mt. Shasta Ski Park's mid-mountain elevation.
Snow temperature is estimated from air temperature and sky cover. A snow thermometer reading is better. Wax ranges vary by brand, so the temperature on the wax label wins. All waxes suggested here are fluoro-free.
Base bevels are usually set by a shop's stone grind. If your skis are new or freshly ground, ask the shop what they set before you change anything.
