Today · PA · mid-mountain, 1,340 ft

Wax & tune for Mount Pleasant of Edinboro

330 ft of vertical, 4 lifts, eastern snow and ice. Wax color and iron temperature from the forecast at mid-mountain, edge settings for how you ski or ride, and a step-by-step home tune.

Loading conditions…
Estimated snow temperature
−6°F
Packed groomers
Air temp
—
Humidity
—
New snow, 48 h
—
Sky
—
Forecast elevation
—
Recent high
—
Adjust conditions
—

Have a snow thermometer? Set the air temperature to your reading for the most accurate wax pick.

How do you ski or ride?
Wax
Violet
Snow range —Iron —

    Edge settings for how you ski
    Base bevel1°
    Side bevel2°
    Edge angle89°

    What the angles do

    A cross-section of the ski's edge. Base bevel lifts the edge off the snow so the ski rolls onto it more smoothly. Side bevel makes the edge sharper so it bites harder snow. Try the numbers to see what each setup does; most skiers choose one and keep it for the life of their skis.

    Base bevel
    Side bevel

    Steel removed by the bevels. Angles drawn 5× actual size.

    The bench walkthrough

    Ten steps, about 90 minutes with cooling time. The settings in each step follow your resort and style above.

    0 of 10

      Your kit for this tune

      Everything the walkthrough uses, sized to today's settings. Shop links go to Amazon. As an Amazon Associate, The Ski Advisor earns from qualifying purchases.

      Skiing Mount Pleasant of Edinboro's snow

      Mount Pleasant of Edinboro is a ski area in Washington, Pennsylvania with 4 lifts and 17 mapped runs. Its lifts reach from about 1,170 ft (358 m) to 1,500 ft (458 m), 330 ft of vertical.

      Frequent freeze-thaw cycles and a lot of machine-made snow make firm, icy conditions common, especially in the morning. The mapped runs mix beginner, intermediate and advanced terrain.

      The forecast on this page is for 1,340 ft (408 m), halfway up the mountain.

      Tuning tips for Mount Pleasant of Edinboro

      • Edges matter more than wax on firm snow. Sharpen often; many skiers here run a 2° or 3° side edge.
      • Machine-made snow is abrasive. Use a harder, colder wax than the temperature alone suggests.
      • With 330 ft of vertical, conditions are similar top to bottom, so this forecast covers the whole hill.

      Related guides

      Weather from MET Norway's forecast at Mount Pleasant of Edinboro's mid-mountain elevation.

      Snow temperature is estimated from air temperature and sky cover. A snow thermometer reading is better. Wax ranges vary by brand, so the temperature on the wax label wins. All waxes suggested here are fluoro-free.

      Base bevels are usually set by a shop's stone grind. If your skis are new or freshly ground, ask the shop what they set before you change anything.