Wax & tune for Jackson Hole Mountain Resort
Steep terrain, cold days and more than 4,000 feet of vertical. Wax color and iron temperature from the forecast at mid-mountain, edge settings for how you ski or ride, and a step-by-step home tune.
- Air temp
- —
- Humidity
- —
- New snow, 48 h
- —
- Sky
- —
- Forecast elevation
- —
- Recent high
- —
Adjust conditions
Have a snow thermometer? Set the air temperature to your reading for the most accurate wax pick.
What the angles do
A cross-section of the ski's edge. Base bevel lifts the edge off the snow so the ski rolls onto it more smoothly. Side bevel makes the edge sharper so it bites harder snow. Try the numbers to see what each setup does; most skiers choose one and keep it for the life of their skis.
The bench walkthrough
Ten steps, about 90 minutes with cooling time. The settings in each step follow your resort and style above.
Your kit for this tune
Everything the walkthrough uses, sized to today's settings. Shop links go to Amazon. As an Amazon Associate, The Ski Advisor earns from qualifying purchases.
Skiing Jackson Hole Mountain Resort's snow
Jackson Hole drops more than 4,000 vertical feet from the top of the tram to the base, and much of it is steep. Wyoming winters are cold, and the summit can be far colder than the base on the same morning.
Wind often packs the upper mountain hard, while storms bring deep, dry snow.
Tuning tips for Jackson Hole Mountain Resort
- Steep, firm terrain is where sharp edges matter most. Many strong skiers here run a 2° or 3° side edge.
- Cold days call for blue or turquoise wax. Soft, warm wax wears off fast on cold, abrasive snow.
- This page uses mid-mountain. For days spent off the tram, set a colder temperature under Adjust conditions.
Related guides
Weather from MET Norway's forecast at Jackson Hole Mountain Resort's mid-mountain elevation.
Snow temperature is estimated from air temperature and sky cover. A snow thermometer reading is better. Wax ranges vary by brand, so the temperature on the wax label wins. All waxes suggested here are fluoro-free.
Base bevels are usually set by a shop's stone grind. If your skis are new or freshly ground, ask the shop what they set before you change anything.
