Ski Edge Angles Explained: 89°, 88° and 87°
What base and side bevel do, how they add up to the number people quote, and which to pick for how you ski.
Two bevels
Base bevel is how far the edge is lifted off the flat of the base, usually 0.5° to 1°. More base bevel means the ski rolls onto its edge more gradually.
Side bevel is how far the side of the edge is filed past vertical, usually 1° to 3°. More side bevel makes a sharper, more aggressive edge that bites harder snow.
Material removed by each bevel is shaded. Angles are drawn five times their real size so you can see them.
What "88°" means
Shops usually describe the side bevel by its angle: a 2° side bevel is called an 88° edge. The actual angle at the corner of the edge also includes the base bevel:
included angle = 90° − side bevel + base bevel
So a ski with 1° base and 2° side has an 89° included angle, even though everyone calls it an 88° edge.
Which angles to choose
| How you ski | Base bevel | Side bevel | Included angle | Feel |
|---|---|---|---|---|
| Cruiser / learning | 1° | 1° (89°) | 89° | Forgiving, releases easily |
| All-mountain | 1° | 2° (88°) | 89° | Sharp but forgiving; the most common setup |
| Carver, hard snow | 0.7° | 3° (87°) | 87.7° | Quick, strong grip on firm groomers |
| Racer (GS / slalom) | 0.5° | 3° (87°) | 87.5° | Instant bite; some slalom skiers use 4° |
| Park | 1° | 1° (89°) | 89° | Detuned tips and tails for rails and boxes |
| Powder | 1° | 1° (89°) | 89° | Soft snow needs float more than bite |
Leave base bevel to the shop
Base bevel is set by a shop's stone grind and you should rarely change it at home. Too much base bevel makes the ski feel vague. At home, only deburr the base edge with one or two light passes in a base guide.
Changing the side bevel
Going from 2° to 3° means filing away more steel, and you can't put it back. Choose an angle and stick with it, and only change it when your skiing changes.
Detuning
Many skiers dull the edge slightly at the tip and tail, past the contact points, so the ski doesn't hook. Racers don't detune. Park skiers detune more.
How to find your current angles
Ask the shop that last tuned your skis; they record what they set. Ski manufacturers also publish factory settings, which are often 1° base with a 1° to 2° side bevel. You can check the side angle yourself: run a permanent marker along the side edge, make one light pass with a guide set to the angle you think it is, and look at the ink. If the stone removed ink evenly across the edge, the angle matches. If it only touched the top or bottom, it doesn't.
Common setups by ski
- Most recreational and all-mountain skis: 1° base and 1° to 2° side.
- Carving and hard-snow skis: 0.7° to 1° base and 2° to 3° side.
- Race skis: 0.5° to 0.7° base and 3° side, sometimes 4° for slalom.
- Powder and park skis: 1° base and 1° side, with tips and tails detuned on park skis.
- Snowboards: usually 1° base and 1° side; riders who carve on firm snow often use 2°. See how to wax a snowboard.
Myths
- "Sharper is always better." A very acute edge grips ice but catches easily and dulls quickly. Match the angle to how you ski.
- "Change the angle for the conditions." Almost nobody does, and you shouldn't need to. Keep your angle and change how sharp you keep it: polish before firm days, just deburr before soft ones.
- "More base bevel makes the ski turn easier." It makes the ski roll onto its edge more gradually, which feels forgiving, but too much makes it vague on hard snow.
Wax color and iron temperature from the forecast for today, tomorrow or this weekend, plus edge settings for how you ski.
